Turn your tractor into a year-round machine.
LS builds attachments carefully matched to their tractor specs — proper sizing, proper ratings. The implements below are our core LS lineup, plus 12 more categories we can source.
Loaders, a backhoe, a land grader, and two slip-clutch rotary cutters, matched to the tractors in our lineup. Prices below, buy online in a couple of minutes or bundle one with your tractor.
Match-fit loader for the MT226E. 1,965 pounds of lift at the pivot pin with a 66-inch bucket — sized so the tractor stays planted with a full scoop.
- Lift capacity (pivot pin @ 1.5m)1,965 lb
- Bucket width66″
- Max lift height94.3″
- Breakout force2,962 lb
- FitsMT226E
The workhorse loader across our MT2E and MT3 orders. 2,506 pounds of lift with a 66-inch bucket and 3,723 pounds of breakout force — a real jump over the smaller frame loaders.
- Lift capacity (pivot pin @ 1.5m)2,506 lb
- Bucket width66″
- Max lift height94.3″
- Breakout force3,723 lb
- FitsMT232HE, MT242HE, MT347HC
Our pairing for the MT473CPS. 2,998 pounds of lift on a 72-inch bucket with over 104 inches of lift height — clears the side of a dump trailer with room to spare.
- Lift capacity (pivot pin @ 1.5m)2,998 lb
- Bucket width72″
- Max lift height104.3″
- FitsMT473CPS
The big loader for the MT4 frame. 3,487 pounds of lift on a 78-inch bucket and 113 inches of lift height — pallets of feed, round bales, and loaded buckets of clay all day.
- Lift capacity3,487 lb
- Bucket width78″
- Max lift height113″
- FitsMT463
Subframe-mounted backhoe for the MT2E compacts — subframe included, so it mounts to the tractor frame the right way instead of hanging off the 3-point. Digs over 8 feet deep with 3,663 pounds of bucket force. Stumps, water lines, culverts.
- Digging depth97.2″
- Bucket digging force3,663 lb
- Swing arc160°
- Bucket rotation180°
- Loading height76.2″
- MountingSubframe included
60-inch land grader on a Cat 1 quick hitch. Smooths driveways, pads, and washed-out gravel roads — drag it and let the blades do the work. Sized for 20 to 60 PTO horsepower, so it runs behind everything from a sub-compact to the MT242HE.
- Working width60″
- Recommended PTO HP20–60 HP
- HitchCat 1 quick hitch
- Capacity14.72 cu ft
- Weight436 lb
5-foot regular-duty rotary cutter with a slip-clutch driveline — when the blades find a stump, the clutch gives instead of your PTO shaft. 50 HP gearbox, 10-gauge welded deck, cuts brush up to 2 inches thick. The right cutter behind the MT226E, MT232HE, and MT242HE.
- Cutting width60″ (5 ft)
- DrivelineSlip clutch
- Gearbox50 HP heavy duty
- Cutting capacity2″ diameter
- Cut height range2″–10″
- Tractor range24–50 HP, Cat 1
- Weight718 lb
6-foot heavy-duty rotary cutter with slip-clutch driveline and a 75 HP gearbox. Reinforced heavy-duty stump jumper and 10-gauge welded deck — built for pasture that only gets cut twice a year. This is the cutter we hang behind the MT347HC and the MT4 utility tractors.
- Cutting width72″ (6 ft)
- DrivelineSlip clutch
- Gearbox75 HP heavy duty
- Cutting capacity2″ diameter
- Lowest cutting height3″
- Tractor range35–72 HP, Cat 1
- Weight880 lb
Photos are official LS Tractor imagery; your exact unit may differ slightly from the one shown. Specifications from LS Tractor USA published data.
We can source any of these through LS — tell us your tractor model and the job, and we'll spec it.
Precision cutting for groomed turf, parks, and lawns. PTO-driven, rear-mount.
3-point hitch box blades for leveling, grading, back-dragging, and road maintenance.
Front loader attachment for debris collection, brush management, and cleanup.
Heavy-duty grapple for root extraction, large debris, and land clearing.
PTO-driven rear tillers for soil cultivation, garden prep, and seedbed creation.
ROPS-mount sun and weather canopies for open-station operator protection.