The Ferris ISX™ 800 Series (Instant Rebate Included) is a zero-turn mower that Dykes Motors sells new. Key specs: Engine Kawasaki® FT730V; Power 24 HP; Deck 52". The starting price is $10,799. Dykes Motors is an authorized Ferris dealer, so setup, genuine parts, and warranty service are all handled at one address. Genuine Ferris parts and service for this machine are available at the same dealership.
Pricing and rebates as of
Financing available: Affirm, PayPal Pay Later
Tap image to open full screen · pinch to zoom
14 official photos · Ferris authorized imagery
Ferris ISX™ 800 Series (Instant Rebate Included)
SKU: 5902155
Engine
Deck Size
Was $11,299
Save $500 (4% Rebate)
Our Price
$10,799
Kawasaki® FT730V · 24 hp · 52" deck
Secure checkout on our own site. We inspect and prep the unit. Pick it up free in Collins, or delivery is included in your order total.
Or pay over time with Affirm at checkout.
Have additional questions or concerns? Want to speak with a Representative?
Input your contact info below and one of our representatives will reach out to you shortly.
Build your package
Engine
Kawasaki® FT730V
Horsepower
24 hp
Category
Zero Turn Mowers
The ISX line carries the ForeFront Suspension System, which absorbs bumps before they reach you or the mower. That means a smoother ride, less fatigue, and the ability to run faster over rough ground and finish the job sooner.
At a Glance
- ✓Kawasaki FT730V engine
- ✓Ferris suspension system
- ✓Dual Hydro-Gear® ZT-3400® transaxles
- ✓iCD™ cutting system
- ✓52" fabricated deck
- ✓Up to 10 mph ground speed
Authorized Ferris dealer · All manufacturer warranties honored
Deck
52"
HP
24 hp
Top Speed
0–10 mph
Warranty
10 years suspension
Why This Machine
What sets the ISX™ 800 Series (Instant Rebate Included) apart
Step up to real commercial
ISX is where Ferris stops pretending and goes full commercial. Heavier frame, bigger engines, thicker deck — built for 30+ hours a week.
ForeFront™ suspension
Four-wheel independent suspension with adjustable coil-overs. Same 10-year warranty as the top-tier machines. Ride quality is not optional on a commercial.
iCD™+ cutting system
Ferris's third-gen cut design. Deeper chamber pulls grass upright, blades finish clean, discharge moves out fast — even in wet grass.
Hydro-Gear ZT-3400 transaxles
Commercial-grade transaxles with 10" cooling fans. Handle heavy loads, side-slopes, and all-day duty cycles without fading.
11-gauge fabricated deck
52" or 60" deck built from 11-ga fabricated steel. Side discharge, mulch-compatible, cutting height 1.5–4.5 inches with a foot-assist lift.
Commercial warranty
3 years / 500 hours commercial, 4 years residential. Suspension covered 10 years no matter what. Engine per manufacturer.
Built On Real Tech
Ferris doesn’t cut corners — and we don’t sell anyone who does.
Every Ferris model is built around four engineering choices that separate them from the rest: full suspension, the iCD+ cutting deck, commercial-grade EFI engines, and Oil Guard extended-interval protection.
Specifications
Full spec sheet
| Engine | Briggs & Stratton CXi Commercial Series |
|---|---|
| Horsepower | 24 hp |
| Engine Displacement | 810 cc |
| Cylinders | 2 |
| Starter | Electric |
| Fuel Type | Gasoline |
| Fuel Capacity | 5 gallons |
| Transmission | Dual Hydro-Gear ZT-3400 with 10" cooling fans |
| Ground Speed Forward | 0–10 mph |
| Ground Speed Reverse | 0–5 mph |
| Parking Brake | Internal transaxle brake with hand lever |
| Suspension | ForeFront™ four-wheel independent (adjustable coil-over) |
| Operator Seat | High-back suspension seat with armrests |
| Instrumentation | Hour meter, fuel gauge, maintenance-minder |
| Deck Construction | 11-gauge fabricated steel with deep deck shell |
| Cutting Height | 1.5–4.5 inches |
| Spindles | Cast-iron, greasable |
| Drive Tires | 22 x 10.5–12 |
| Caster Tires | 13 x 6.5–6 |
| Overall Length | 80 inches |
| Overall Height | 48 inches |
| Overall Width | 62–72 inches (deck-dependent) |
| Dry Weight | 985 lbs |
| Machine Warranty | 3 years / 500 hours commercial · 4 years residential |
| Suspension Warranty | 10 years |
| Engine Warranty | Per engine manufacturer's warranty |
Specifications reflect Ferris factory data for this family. Variants (engine choice, deck size) may vary slightly — the exact spec sheet for your configuration is available at our Collins, MS location or by text to our team at (601) 516-7255.
See Every Angle
Official Ferris product photography — click any photo in the gallery above to expand.
See It In Action
Watch the Ferris ISX™ 800 Series (Instant Rebate Included) on Ferris
Visit the official Ferris YouTube channel for in-action footage, or call our team — we know every machine we sell inside and out.
Compare similar Ferris Zero Turn Mowers
See all Zero Turn Mowers →
Ferris ISX™ 800 Series (Instant Rebate Included)
Briggs & Stratton® CXi · 27 hp
Deck: 52"
The ISX 800 upgrades to Hydro-Gear ZT-3400 transaxles and advanced suspension for demanding commercial routes.
Was $10,799
Save $500 (4% Rebate)
Our Price$10,299
Free pickup at the store, local delivery from $199, freight quote elsewhere.
Ferris IS® 700 Series (Q4 Rebate Included)
Briggs & Stratton® CXi · 27 hp
Deck: 52", 60"
The IS 700 52" steps up productivity with commercial suspension and a 27 HP engine for demanding work.
Was $9,049
Save $400 (4% Rebate)
Our Price$8,649
Free pickup at the store, local delivery from $199, freight quote elsewhere.
Ferris F60 Zero Turn
Kawasaki® FX600V · 19 hp
Deck: 36"
The F60 is Ferris's compact zero-turn built for tight spaces — ideal for gated backyards and detailed trimming in residential properties.
Our Price$8,249
Free pickup at the store, local delivery from $199, freight quote elsewhere.
Buy the Ferris ISX™ 800 Series (Instant Rebate Included) in Collins, Mississippi
Dykes Motors is an authorized Ferris dealer at 3069 Hwy 49 in Collins, MS 39428, serving Hattiesburg, Laurel, Petal, Columbia and all of south Mississippi. Pickup is free at our Collins store, we deliver across Mississippi with local delivery from $199, and freight is quoted by distance for anywhere farther. Call (601) 516-7255 to check availability on the Ferris ISX™ 800 Series (Instant Rebate Included).
Questions about the Ferris ISX™ 800 Series (Instant Rebate Included)
What are the specifications of the Ferris ISX™ 800 Series (Instant Rebate Included)?
Key specs for the Ferris ISX™ 800 Series (Instant Rebate Included): Engine Kawasaki® FT730V; Power 24 HP; Deck 52". The full specification table is on this page.
How much does the Ferris ISX™ 800 Series (Instant Rebate Included) cost?
The starting price for the Ferris ISX™ 800 Series (Instant Rebate Included) at Dykes Motors is $10,799.
Is the Ferris ISX™ 800 Series (Instant Rebate Included) in stock?
Call (601) 516-7255 and we will tell you what is on the lot and the current lead time on the Ferris ISX™ 800 Series (Instant Rebate Included).
Does Dykes Motors sell parts and service for the Ferris ISX™ 800 Series (Instant Rebate Included)?
Yes. Dykes Motors sells genuine Ferris parts and has a service department at 3069 Hwy 49 in Collins, Mississippi. Call parts and sales at (601) 516-7255 or service at (601) 336-2541.
Can I finance the Ferris ISX™ 800 Series (Instant Rebate Included)?
You can apply for financing online with Dykes Motors, subject to credit approval.
🔧
Local Service & Support
Our team services every machine we sell — before and after the sale.
Service Info →📍
See It In Person
Come to our Collins, MS location and walk the lot. No pressure, real advice.
Get Directions →